What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
Owens Corning Foamular Extruded Polystyrene Insulation-03/19/2003
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/Canada
Structure such as solid, liquid, aerosol etc.
Form: solidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: May 03, 2022One Owens Corning Parkway
Toledo OH 43659
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Polystyrene 009003-53-6 80-90 No 1-Chloro-1,1-difluoroethane 000075-68-3 7.0-12.0 Yes CoC List Hexabromocyclododecane 003194-55-6 0.5-1.5 Yes Talc (non-fibrous) 014807-96-6 0-2.0 Yes CoC List Click on each chemical for information on chemical structure, properties and health effects.
Click on Chemical, CAS No./ID headings to sort values.
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Is a seven-digit number (xxx-xxx-x) assigned by the European Commission to chemicals contained in three inventories:
EC No.
EINECS is the European Inventory of Existing Commercial Substances and its EINECS numbers are displayed as 2xx-xxx-x.
ELINCS is the European List of Notified Chemical Substances that was available after September 18, 1981 and its ELINCS numbers are displayed as 4xx-xxx-x.
NLP is the No-Longer Polymers category and its NLP numbers are displayed as 5xx-xxx-xPercent of chemical in preparation.
% Conc.The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
UN Global Harmonization Classification
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.Hazard Codes and their associated descriptions are an essential part of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). There are 4 categories of Hazard Codes:
- Physical Hazard Codes (H200 series)
- Health Hazard Codes (H300 series)
- Environmental Hazard Codes (H400 series)
- Supplementary Hazard Codes (EUH series)
Hazard Codes may be found in the "Advanced" version of Chemical Composition / Ingredients tables.
Hazard Statement CodePrecautionary Codes and their associated descriptions are an essential part of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
Precautionary Code
Precautionary Codes may be found in the "Advanced" version of Chemical Composition / Ingredients tables.PictogramSVHC is a substance (identified by the European Chemicals Agency) that may have serious and often irreversible effects on human health and the environment. SVHC are defined in Article 57 of Regulation (EC) No 1907/2006 (“the REACH Regulation”) and include substances which are:
SVHC?
1. Carcinogenic, Mutagenic or toxic to Reproduction (CMR), meeting the criteria for classification in category 1 or 2 in accordance with Directive 67/548/EEC or in category 1a or 1b in accordance with EC No 1272/2008This directive was recently replaced by the new EU regulation (EC) No 1272/2008.
2. Persistent, Bioaccumulative and Toxic (PBT) or very Persistent and very Bioaccumulative (vPvB) according to the criteria in Annex XIII of the REACH Regulation, or
3. Identified, on a case-by-case basis, from scientific evidence as causing probable serious effects to human health or the environment of an equivalent level of concern as those above (e.g. endocrine disrupters).Polystyrene 009003-53-6 -- 80-90 -------- ------- ---- No 1-Chloro-1,1-difluoroethane 000075-68-3 200-891-8 7.0-12.0 H220, H280, H412, H420 P210, P273, P410+P403,P502 No Hexabromocyclododecane 003194-55-6 -- 0.5-1.5 -------- ------- ---- Yes Talc (non-fibrous) 014807-96-6 238-877-9 0-2.0 -------- P101, P102, P280, P305+P351+P338 ---- No Click on each chemical for information on chemical structure, properties and health effects.
Click on Chemical, CAS No./ID or EC No. headings to sort values.
Sources for Chemical Classifications- European Commission>JRC>IHCP>European chemical Substances Information System (ESIS) Table 3.1
- European Chemicals Agency, http://echa.europa.eu/
ECHA Disclaimer: http://echa.europa.eu/web/guest/legal-notice
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :March 19, 2003 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING0 1 0 -
Warnings
MSDS: First Aid Measures Inhalation: If dust from cutting or drilling is inhaled, immediately remove the affected person to fresh air. If symptoms persist, get medical attention. Skin Contact: For skin contact, wash with mild soap and running water. If irritation persists get medical attention. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists get medical attention. Ingestion: Ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure that partial or complete intestinal obstruction does not occur. Do not induce vomiting unless directed to do so by medical personnel. -
Acute health effects
From MSDS Emergency Overview Exposure to dust may be irritating to eyes, nose, and throat. To prevent ignition, avoid smoking, keep from open flames and high temperatures. Grinding, sawing or fabrication activities can produce dust particles which may under certain conditions form explosive dust atmospheres that can be ignited. Potential Health Effects Inhalation: Dusts produced by cutting or drilling of this product may cause irritation of the nose, throat, and respiratory tract. Skin Contact: No effects expected Eye Contact: Dust produced from cutting or drilling of this product may cause slight irritation to the eyes. Ingestion: Ingestion of this product is unlikely. However, ingestion of product may produce gastrointestinal irritation and disturbances. Medical Conditions Aggravated by Exposure: Chronic respiratory or skin conditions may temporarily worsen from exposure to this product. -
Chronic health effects
From MSDS Chronic respiratory or skin conditions may temporarily worsen from exposure to these products. -
Carcinogenicity
From MSDS ACGIH, IARC, OSHA, and NTP carcinogen lists have been checked for those components with CAS registry numbers. Polystyrene (9003-53-6) IARC: Supplement 7, 1987; Monograph 19, 1979 (Group 3 (not classifiable)) Talc (14807-96-6) ACGIH: A4- Not Classifiable as a Human Carcinogen (containing no asbestos fibers) IARC: Group 3 (not classifiable) Supplement 7,1987; Monograph 42,1987 -
Handling information
From MSDS Handling Procedures: No special procedures are required for this material. Avoid inhaling dusts or vapors. Avoid eye and excessive skin contact. Use only with adequate ventilation. As with all chemicals, good industrial hygiene practices should be followed when handling this material. Special care must be taken to avoid buildup of dusts. Storage Procedures: No special procedures are required for this material. -
Disposal information
From MSDS Material, if discarded, is not expected to be a characteristic hazardous waste under RCRA. Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations. -
First Aid
From MSDS Inhalation: If dust from cutting or drilling is inhaled, immediately remove the affected person to fresh air. If symptoms persist, get medical attention. Skin Contact: For skin contact, wash with mild soap and running water. If irritation persists get medical attention. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists get medical attention. Ingestion: Ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure that partial or complete intestinal obstruction does not occur. Do not induce vomiting unless directed to do so by medical personnel.
Browse by PRODUCT CATEGORY
Note: Brand/Trade Names are trademarks of their respective holders.
© 2001-2024 DeLima Associates. All rights reserved
-