What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Kelly-Moore 1650 Acry-Plex Interior Semi-Gloss Enamel, Bone 27
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaKelly-Moore 1650 Acry-Plex Interior Semi-Gloss Enamel, Bone 27 is a premium quality, interior, 100% acrylic semi-gloss enamel designed for use on properly prepared, new and previously painted interior wall, ceiling and trim surfaces. Provides a durable and washable finish when applied to gypsum wallboard, plaster, concrete, masonry, wood and hardboard. Excellent for commercial and residential application.
Purpose of product.
Usage: Interior Semi-Gloss Enamel for walls and ceilingsStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 20241390 El Camino Real, 3rd Floor
San Carlos CA 94070
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Titanium dioxide 013463-67-7 <19 Yes 
CoC List
Silica, amorphous (Diatomaceous silica) 007631-86-9 -- No Water 007732-18-5 <51 No Surfactant(s) (unspecified) 000000-00-4 <51 No Defoaming agent (unspecified) 888888-05-7 <51 No Vinyl Acrylic Resin (unspecified) 888888-05-6 21.0 No Propylene glycol 000057-55-6 -- Yes CoC List
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :January 26, 2011 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING1* 1 0 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : <100
Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels7.0-10.0 -
Warnings
WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424- LEAD (5323) or log on to www.epa.gov/lead.
Avoid contact with eyes, skin and clothing. Do not take internally. Wash thoroughly after handling. Close container after each use. Protect from freezing. For additional safety information, consult the Material Safety Data Sheet for this product. USE ONLY WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. -
Acute health effects
From MSDS:
Emergency Overview
Caution: Prolonged or repeated contact may dry skin and cause irritation.
Potential Health Effects
Routes of exposure: Inhalation. Skin contact.
Eye Contact: Direct contact with eyes may cause temporary irritation.
Skin Contact: Prolonged or repeated contact may dry skin and cause irritation.
Inhalation: Prolonged inhalation may be harmful.
Ingestion: Ingestion may cause irritation and malaise.
Target organs: Central nervous system. Skin.
Signs and symptoms: Defatting of the skin. Vapors may cause drowsiness and dizziness.
-
Chronic health effects
From MSDS:
Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis. Organic solvents may be absorbed into the body by inhalation and cause permanent damage to the nervous system, including the brain.
-
Carcinogenicity
Potentially carcinogenic components are typically only present in trace amounts. Due to the form of the product, exposure to the potentially carcinogenic components is not expected.
ACGIH Carcinogens:
Titanium dioxide (CAS 13463-67-7) A4 Not classifiable as a human carcinogen.
IARC Monographs. Overall Evaluation of Carcinogenicity:
Silicon dioxide (CAS 7631-86-9) 3 Not classifiable as to carcinogenicity to humans.
Titanium dioxide (CAS 13463-67-7) 2B Possibly carcinogenic to humans.
-
Handling information
Provide adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid breathing vapor. Wear appropriate personal protective equipment. Wash thoroughly after handling. Observe good industrial hygiene practices.
Store in tightly closed original container in a dry, cool and well ventilated place. Store away from incompatible materials.
-
Disposal information
Do not allow this material to drain into sewers/water supplies. Dispose in accordance with applicable federal, state, and local regulations.
-
First Aid
Eye contact: Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lenses. Get medical attention if symptoms persist.
Skin contact: Immediately remove contaminated clothing and shoes and wash skin with soap and plenty of water. Get medical attention if irritation persists after washing.
Inhalation: Move to fresh air. Oxygen or artificial respiration if needed. Get medical attention if any discomfort continues.
Ingestion: Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable take to hospital along with these instructions.
Notes to physician: Treat symptomatically.
General advice: If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.
-
UN Global Harmonization Classification