What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
UGL Nudeck Roof Cement-Old Product
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaPurpose of product.
Usage: Roofing CementStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 13, 20241396 Jefferson Avenue
Dunmore PA 18509
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Asphalt 008052-42-4 30-80 Yes 
CoC List
Stoddard solvent 008052-41-3 3.0-40.0 Yes CoC List
Perlite 093763-70-3 0-20 No Attapulgite 012174-11-7 0-20 Yes CoC List
Wood flour 009004-34-6 0-15 Yes CoC List
Styrene/Butadiene copolymer 009003-55-8 0-20 No Propylamine, 3-(isodecyloxy)-, acetate 028701-67-9 0-3 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :November 01, 2004 Date when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
MSDS Verified :February 18, 2011 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2 2 0 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : 262
-
Warnings
Vapors are heavier than air and may travel along the ground or be moved by ventilation to locations distant from the point of material handling. To prevent fumes from entering buildings or confined areas, close all air intake sources near the material handling or the work area. To prevent ignition, avoid smoking, keep away from heat, open flames and sources of static or electrical sparking. Avoid prolonged or repeated inhalation of vapors or spray mists. Avoid prolonged or repeated skin contact.
Store in a cool, dry place out of direct sunlight and away from heat, sparks and flames. -
Acute health effects
From MSDS:
Health Hazard Data
Inhalation: Excessive breathing of high vapor concentrations can cause nasal and respiratory irritation.
Skin and eye contact: Prolonged / repeated contact may cause irritation.
Skin absorption: Prolonged / repeated contact may cause irritation.
Ingestion: Can cause gastrointestinal irritation, nausea and vomiting.
Medical conditions generally aggravated by exposure: None known. -
Chronic health effects
From MSDS:
Fumes from product can be unpleasant, may cause nausea, headache and irritating to eyes, skin and respiratory tract. -
Carcinogenicity
No ingredients listed as carcinogens by IARC, NTP and OSHA.
-
Handling information
Vapors are heavier than air and may travel along the ground or be moved by ventilation to locations distant from the point of material handling. To prevent fumes from entering buildings or confined areas, close all air intake sources near the material handling or the work area. To prevent ignition, avoid smoking, keep away from heat, open flames and sources of static or electrical sparking. Avoid prolonged or repeated inhalation of vapors or spray mists. Avoid prolonged or repeated skin contact.
Store in a cool, dry place out of direct sunlight and away from heat, sparks and flames. -
Disposal information
Dispose of in approved sites according to local, state and federal regulations. -
California Prop. 65 Warning
No information provided.
-
First Aid
Skin contact : If this product comes in contact with skin, remove material with mineral oil, then wash with soap and plenty of water.
Eye contact: If this product comes in contact with eyes, flush eye with plenty of water for at least 15 minutes and seek medical attention.
Ingestion: If swallowed, do not induce vomiting. Get medical attention.
Inhalation: If respiratory discomfort occurs, remove to fresh air. If discomfort continues, administer oxygen and get medical attention.
-
UN Global Harmonization Classification
